This black chiffon top features a fitted shape, a deep V-neckline and an open-front design secured with fabric ties. The ties come out from fabric tunnels on both sides of the garment and extend diagonally upward to meet at the front neckline.

The design combines a fitted waist-length body with long sleeves and a slightly flared sleeve opening. The hem also has a soft flared shape, created through the extra fabric volume below the side tie tunnels.

Made from lightweight, non-stretch woven chiffon, this style requires careful attention to its pattern, fabric layers and construction details.

 

Fabric Selection and Layer Construction

This top is made from regular woven chiffon without stretch. The fabric is lightweight and soft, making it suitable for styles that need a light appearance and natural movement.

Because chiffon is thin and has no stretch, fabric handling and pattern accuracy are important during cutting and sewing. The fitted shape also needs to be considered carefully when developing the garment measurements.

The upper front bodice uses two layers of chiffon to provide additional coverage. Below the waist, the front returns to a single layer.

This selective double-layer construction provides coverage where it is needed without adding an extra layer throughout the entire garment.

 

Garment Construction and Tie Details

The open-front design is one of the main construction features of this chiffon blouse.

The front panels do not overlap. Instead, separate chiffon ties are threaded through fabric tunnels on both sides of the garment. These tunnels are made by folding and sewing the main fabric, rather than attaching separate strips.

The ties extend diagonally upward from the side waist area and are tied together at the deep V-neckline. This creates the front neckline shape and secures the garment in place.

The ties are also made from the same chiffon fabric. Their ends are finished with a turned-in edge for a clean appearance.

Below the side tie tunnels, additional fabric volume creates a flared hem shape. This detail is part of the garment’s pattern design and gives the lower section more room and movement.

The sleeves use a regular set-in construction. They are long with slightly flared openings, complementing the fitted body and flared hem.

 

Pattern Making and Sample Development

Accurate pattern development is important for this style because several design details work together to create its final shape.

During sample development, attention is given to:

• The fitted body measurements and waist-length proportions.
• The position and angle of the side tie tunnels.
• The length and positioning of the separate ties.
• The depth and shape of the V-neckline after tying.
• The additional fabric volume below the side tunnels.
• The shape and opening width of the slightly flared sleeves.

The two side tunnels and their positions need to be carefully considered during pattern making. Their placement affects how the ties sit and how the lower part of the garment opens.

Sample fitting helps check the relationship between the body fit, neckline, tie position and flared hem before bulk production.

MAG Fashion provides custom sample development for brands that need to adjust garment measurements, proportions and construction details.

 

Finishing and Quality Control

Lightweight chiffon requires careful finishing to maintain a neat appearance.

The hem and sleeve openings use a 0.5 cm turned-in finish. The ends of the chiffon ties are also turned in to keep the edges clean.

For this design, quality control pays particular attention to the following details:

• The position and length of the left and right tie tunnels.
• The consistency of the fabric volume below both tunnels.
• The balance and symmetry of the flared hem.
• The appearance and finish of the tie ends.
• The neckline shape and tie position.
• The hem and sleeve opening finish.

Checking the two side structures is especially important because any difference in their position or fabric volume may affect the balance of the finished garment.

At MAG Fashion, quality control includes checking both garment measurements and the construction details that affect the final appearance.

 

Chiffon Products Manufacturing

MAG Fashion supports custom women’s wearing manufacturing for fashion brands and wholesalers.

Our services include fabric and trim sourcing, pattern making, sample development, garment production and quality control.

We work with different woven fabrics and garment constructions, including lightweight chiffon styles that require careful pattern handling and detailed sewing work.

Depending on the product design, materials and order requirements, we can discuss flexible production arrangements and small batch clothing production.

Whether you are developing a new chiffon blouse or preparing a style for bulk production, MAG Fashion can support the process from sample development to finished garments.

 

MAG Fashion | Your Apparel Manufacturer in China